You can download Linux Mint from the Linux Mint website.
Read below to choose which edition and architecture are right for you.
Linux Mint comes in 3 different flavours, each featuring a different desktop environment.
|Cinnamon||The most modern, innovative and full-featured desktop|
|MATE||A more traditional, and faster desktop|
|Xfce||The most lightweight desktop|
The most popular version of Linux Mint is the Cinnamon edition. Cinnamon is primarily developed for and by Linux Mint. It is slick, beautiful, and full of new features.
Linux Mint is also involved in the development of MATE, a classic desktop environment which is the continuation of GNOME 2, Linux Mint’s default desktop between 2006 and 2011. Although it misses a few features and its development is slower than Cinnamon’s, MATE uses less resources and can run faster on older computers.
Xfce is a lightweight desktop environment. It doesn’t support as many features as Cinnamon or MATE, but it’s extremely stable and very light on resource usage.
Of course, all three desktops are great and Linux Mint is extremely proud of each edition. Although there are more features and better support in some editions than others, and some do run faster and use less resources than others, they’re all great alternatives and choosing the right edition is largely a matter of taste.
Other than their features and performance, Cinnamon, MATE and Xfce also represent three different desktop environments, with different menus, different panels and configuration tools. The right one for you is the one where you feel at home.
If you are unsure which desktop to choose start with the Cinnamon edition. Try them all eventually when you have the time. All three of them have their own audience within the Linux Mint community and they’re all very popular.
From version 20 onward, only 64-bit is available.
The 32-bit ISO images on prior versions are provided for compatibility with older computers. 32-bit processors are extremely rare nowadays and most computers are able to run in 64-bit. If your computer was manufactured after 2007, you probably have a 64-bit processor.
If you have an old computer and you are unsure whether or not it can run in 64-bit, read X86 Chronology.
You can try to boot Linux Mint 64-bit on your computer. If it isn’t compatible, nothing bad will happen. You will just get an error message.
If you cannot boot or install Linux Mint because your hardware is too recent and is not properly detected see the Edge ISO Images chapter in the Linux Mint User Guide for an alternative ISO.
It is important to verify the integrity and authenticity of your ISO image.
The integrity check confirms that your ISO image was properly downloaded and that your local file is an exact copy of the file present on the download servers. An error during the download could result in a corrupted file and trigger random issues during the installation.
The authenticity check confirms that the ISO image you downloaded was signed by Linux Mint, and thus that it isn’t a modified or malicious copy made by somebody else.
All download mirrors provide the ISO images, a
sha256sum.txt file and a
sha256sum.txt.gpg file. You should be able to find these files in the same place you downloaded the ISO image from.
If you can’t find them, browse the Heanet download mirror and click the version of the Linux Mint release you downloaded.
Do not copy their content, use “right-click->Save Link As…” to download the files themselves and do not modify them in any way.
To check the integrity of your local ISO file, generate its SHA256 sum and compare it with the sum present in
sha256sum -b yourfile.iso
If you are using Windows follow the tutorial How to verify the ISO image on Windows.
If the sums match, your ISO image was successfully downloaded. If they don’t, download it again.
To verify the authenticity of
sha256sum.txt, check the signature of
sha256sum.txt.gpg by following the steps below.
gpg --keyserver hkp://keyserver.ubuntu.com:80 --recv-key "27DE B156 44C6 B3CF 3BD7
D291 300F 846B A25B AE09"
If gpg complains about the key ID, try the following commands instead:
gpg --keyserver hkp://keyserver.ubuntu.com:80 --recv-key A25BAE09 gpg --list-key --with-fingerprint A25BAE09
Check the output of the last command, to make sure the fingerprint is
27DE B156 44C6 B3CF
3BD7 D291 300F 846B A25B AE09 (with or without spaces).
gpg --verify sha256sum.txt.gpg sha256sum.txt
The output of the last command should tell you that the file signature is
good and that it was signed with the
GPG might warn you that the Linux Mint signature is not trusted by your computer. This is expected and perfectly normal.
For more information on ISO verification, or to verify BETA, LMDE or old releases, read How to Verify ISO images.
The easiest way to install Linux Mint is with a USB stick.
If you cannot boot from USB, you can use a blank DVD.
Right-click the ISO file and select, or launch .
Select your USB device and click Write.
Download Etcher, install it and run it.
Click Select image and select your ISO file.
Click Select drive and select your USB stick.
Optical discs are slow and burning to disc is prone to errors.
To prevent issues, burn at the lowest possible speed.
Burn the content of the ISO onto the DVD, not the ISO file itself. When finished, your DVD should contain directories such as
casper, it shouldn’t be an empty DVD containing an .iso file.
Right-click the ISO file and select.
To make sure the ISO was burned without any errors, select.
Right-click the ISO file and select.
Now that you have Linux Mint on a USB stick (or DVD) boot the computer from it.
- Insert your USB stick (or DVD) into the computer.
- Restart the computer.
- Before your computer boots your current operating system (Windows, Mac, Linux) you should see your BIOS loading screen. Check the screen or your computer’s documentation to know which key to press and instruct your computer to boot on USB (or DVD).
Most BIOS have a special key you can press to select the boot device and all of them have a special key to enter the BIOS configuration screen (from which you can define the boot order). Depending on the BIOS, these special keys can be Escape, F1, F2, F8, F10, F11, F12, or Delete. That information is usually briefly written on the screen during the boot sequence.
On Macs, keep your finger pressed on the Alt or Option key after hearing the boot sound.
- The Linux Mint ISO can be booted both in EFI or BIOS mode. In EFI mode it shows a grub menu. In BIOS mode it shows an isolinux menu.
- From one of these menu, press Enter to start Linux Mint from your USB stick (or DVD).
When you boot the computer from the USB stick (or DVD), Linux Mint starts a
live session. It logs you in automatically as a user called
mint and shows you a desktop with the installer on it:
is similar to a normal session (i.e. to Linux Mint once it is
permanently installed on the computer), but with the following
- The Live session is slower (it is loaded from a USB stick or DVD as opposed to a SSD or HDD).
- Changes you make in the live session are not permanent. They are not written to the USB stick (or DVD) and they do not impact the system installed by the installer.
- Some applications work differently (or not at all) in the live session (Timeshift, Flatpak, Update Manager, Welcome Screen..etc.).
The username for the live session is
mint. If asked for a password press Enter.
To permanently install Linux Mint on your computer:
- Double-click Install Linux Mint.
- Select your language.
- Connect to the Internet.
- If you are connected to the Internet, tick the box to install the multimedia codecs.
- Choose an installation type.
If Linux Mint is the only operating system you want to run on this computer and all data can be lost on the hard drive, choose Erase disk and install Linux Mint.
Encrypt the new Linux Mint installation for security refers to full disk encryption. At this stage of the installation your keyboard layout wasn’t yet selected so it is set to en_US. If you decide to use this option, keep this in mind when entering a password. Note that there are issues with this option and some NVIDIA drivers. If you are new to Linux use home directory encryption instead (you can select it later during the installation).
If another operating system is present on the computer, the installer shows you an option to install Linux Mint alongside it. If you choose this option, the installer automatically resizes your existing operating system, makes room and installs Linux Mint beside it. A boot menu is set up to choose between the two operating systems each time you start your computer.
If you want to manage the partitions or specify which partitions to use, select Something else.
Linux Mint requires one partition to be mounted on the root
The Linux Mint operating system (without additional software or personal data) takes roughly 15GB, so give this partition a decent size (100GB or more).
ext4 is recommended. It is the most popular Linux filesystem.
Also create a
partition. This partition is used for hibernation and as a safety
buffer in case your computer runs out of RAM. Give this partition a size
equal to the amount of RAM in your computer.
- Select your timezone
- Select your keyboard layout
- Enter your user details
name can be your real name, but it doesn’t have to be. It is only used locally, in the screensaver and on the login screen.
username is what you log in as, and your
hostname is the name of your computer on the network.
To prevent bugs only use lowercase characters, with no punctuation or accentuation.
To protect your personal data against local attacks (people around you, or in case your computer gets stolen), tick Encrypt my home folder.
Choose a strong password.
- Enjoy the slideshow while Linux Mint is installed on your computer.
When the installation is finished, click Restart Now.
The computer will then start to shut down and ask you to remove the USB disk (or DVD). Upon reboot, your computer should show you a boot menu or start your newly installed Linux Mint operating system.